PCME-US 100 - Continuous Measuring System for Particulate Emissions
 
 
 
 
 
 
* US Patented AC Electrodynamic measurement principle provides measurement stability, velocity insensitivity and tolerance due to dust build up
* RS232/485 inputs dust reading directly to the PLC
* Input up to 8 channels of analog data into the PLC via the optional A/D converter
* Broken bags located by compartment and/or row when installed with PLC broken bag locator control software
* Low minimum detection level of 0.1 mg/m3
 
                           (please click on a link below to go directly to that area on this page)
 
 
 
 
 
The PCME-US 100 is a cost-effective emission monitoring system for baghouses, combining low cost, advanced dust detection technology, direct communication with the PLC and broken bag location by compartment and/or row. It is designed for use in any process which has particulate control installed, eg: bag, ceramic and cartridge filters, cyclones and spray driers, where dust monitoring is required. The system can also function as an A/D converter for up to 8 analog inputs.
 
 
 		 
 
 
The PCME-US 100 is a cost-effective dust emission monitoring system for baghouses, combining low cost, advanced dust detection technology, direct communication with the PLC and broken bag location by compartment and/or row. It is designed for use in any process which has particulate control installed, eg: bag, ceramic and cartridge filters, cyclones and spray driers, where dust monitoring is required. The system can also function as an A/D converter fro up to 8 analog inputs.
 
 
 
 
 
 
 
PCME-US is a division of B3 Systems, Inc.
B3 Systems, Inc. is an independent distributor of PCME, Ltd. products.
 
 
7711 Welborn Street
Suite 106
Raleigh, NC  27615
 
Phone 919-790-9090
Fax 919-790-0550
 

© 2004 B3 Systems, Inc.